Hear from Our Customers
Your car or yacht gets protection that’s literally harder than factory clear coat. We’re talking 9-10h hardness versus the standard 4h that scratches so easily. Water beads off like it’s afraid to stick around.
Salt spray, bird droppings, UV rays—they all bounce off instead of etching into your paint. You spend less time scrubbing and more time enjoying what you invested in. The gloss? Deeper than showroom condition, and it stays that way for years.
This isn’t about making your vehicle look good for a few months. It’s about protecting what you’ve worked for with technology that actually works.
We’ve been protecting luxury vehicles and marine assets in the Islip area for years. We know what it means when someone brings us their exotic car or yacht—it’s not just transportation, it’s an investment.
Our facility in Port Jefferson Station was built specifically for owners who expect more than basic service. Climate-controlled environment, precision application, and the kind of attention to detail that matches what you put into acquiring these assets.
Long Island’s marine environment is tough on paint and gelcoat. Salt air, intense summer sun, harsh winters—we’ve seen what happens when protection fails. That’s why we use professional-grade ceramic coatings designed to handle exactly what your vehicles face here.
First, we inspect every surface to identify any imperfections, contamination, or areas that need correction. Your paint or gelcoat gets thoroughly decontaminated and corrected to create the perfect foundation.
The ceramic coating goes on in multiple layers under controlled conditions. No dust, no humidity issues, no shortcuts. Each layer bonds at the molecular level, creating a protective shell that becomes part of your vehicle’s surface.
After curing, you get a surface that’s hydrophobic, chemical-resistant, and significantly harder than what came from the factory. We document everything and provide you with warranty information and maintenance guidelines. The whole process typically takes several days depending on the size and condition of your vehicle.
Ready to get started?
Paint correction comes standard because ceramic coating magnifies everything—including imperfections you want gone. We remove swirl marks, light scratches, and oxidation before any coating touches your surface.
For marine applications, we address the specific challenges of Long Island’s saltwater environment. Gel coat preparation, proper surface prep for fiberglass, and coating selection that handles constant moisture exposure and salt spray.
Automotive applications get the same thorough approach. Whether it’s an exotic car that rarely sees weather or a daily driver that faces everything, the preparation and application process ensures maximum durability. You also get maintenance products and instructions to keep that protection performing at its best.
The Islip area’s seasonal changes mean your vehicles face everything from summer heat and humidity to winter salt and freeze-thaw cycles. Our coating selection and application techniques account for these local conditions.
Marine ceramic coatings typically last 2-4 years in Long Island’s saltwater environment, depending on the specific product and maintenance. The harsh conditions here—salt spray, UV exposure, and temperature fluctuations—are exactly what quality marine coatings are designed to handle.
Unlike automotive applications where coatings can last 5-10 years, marine environments are more demanding. However, even 2-4 years beats traditional wax by a significant margin, and the protection is far superior. You’re looking at genuine resistance to salt corrosion, oxidation, and staining rather than just a temporary barrier.
We select coatings specifically formulated for marine use, not automotive products adapted for boats. The chemistry is different because the challenges are different.
No, ceramic coating must be applied to a completely clean, decontaminated surface. Any existing wax, sealant, or polish will prevent proper bonding and cause coating failure.
This is why proper preparation is crucial and why we don’t skip steps. We strip everything off, decontaminate the surface with specialized products, and often perform paint correction to ensure the coating has the best possible foundation to bond with.
Trying to apply ceramic coating over existing products is like trying to paint over wax—it might look good initially, but it won’t last. The molecular bonding that gives ceramic coatings their durability only happens when the coating can actually reach and bond with the paint or gelcoat surface.
Graphene coatings are essentially the next evolution of ceramic coating technology. While ceramic coatings use silicon dioxide as their primary protective element, graphene coatings incorporate graphene oxide, which offers enhanced flexibility and heat resistance.
For Long Island’s climate with significant temperature swings, graphene’s flexibility advantage can be beneficial. It’s less likely to develop stress fractures from expansion and contraction cycles. Graphene also tends to be more hydrophobic and can offer better stain resistance.
Both provide excellent protection, but graphene typically costs more and may offer slightly better performance in demanding conditions. The choice often comes down to budget and specific protection needs. We can recommend the best option based on your vehicle type and how you use it.
Maintenance is simpler than traditional protection methods, but it’s not maintenance-free. You’ll wash less frequently because dirt and contaminants don’t bond as readily, and when you do wash, everything comes off easier.
Use pH-neutral soap, microfiber wash mitts, and avoid automatic car washes with brushes that can scratch the coating. For marine applications, rinse with fresh water after saltwater exposure when possible. Some coatings benefit from periodic application of a maintenance spray to refresh the hydrophobic properties.
The key is gentleness and consistency. The coating protects your paint, but harsh chemicals or abrasive techniques can damage the coating itself. We provide specific maintenance products and detailed instructions based on which coating system we apply to your vehicle.
Even stored vehicles benefit from ceramic coating, though the protection needs are different. Indoor storage protects from weather but not from dust, handling marks, or the gradual degradation that happens over time.
Ceramic coating makes cleaning stored vehicles much easier—dust and fingerprints wipe off without scratching. For vehicles that see occasional use, the coating provides protection during those times when they are exposed to elements.
For high-value vehicles, ceramic coating also helps preserve resale value by maintaining that deep gloss and protecting against minor handling damage. The investment often pays for itself in reduced detailing costs and better condition retention over time.
Minor damage to ceramic coating can often be polished out, similar to clear coat repair. More significant damage may require spot repair or reapplication of that section. This is why proper application and quality coatings matter—they’re more resistant to damage and easier to repair when necessary.
Unlike traditional protection that wears away gradually, ceramic coatings tend to maintain their properties until they fail, then need replacement. Quality installations typically last their full expected lifespan without major issues.
We provide warranty coverage for application defects and can handle any necessary repairs. The key is addressing issues promptly rather than letting them spread. Most coating problems are preventable with proper maintenance and reasonable care during use.
Local Resources
Useful Links
Other Services we provide in Islip
