Hear from Our Customers
Your boat stops looking tired and weathered. The gel coat regains its original luster, free from oxidation and salt stains that make even expensive vessels look neglected.
Teak surfaces return to their natural blonde color without the gray, moldy appearance that screams poor maintenance. Every surface gets the specialized care it needs—not generic car products that can actually damage marine materials.
You get back on the water with confidence, knowing your investment looks as good as it performs. No more embarrassment at the yacht club or marina. Just a vessel that reflects the pride you take in ownership.
At Legacy Motors and Marine, we understand the unique challenges of maintaining luxury vessels in Riverside’s marine environment. We’ve been serving discerning boat owners who refuse to compromise on quality.
The Long Island Sound’s salt air and UV exposure demand specialized knowledge—not the same approach used on driveways. We use marine-grade products and techniques developed specifically for gel coat, fiberglass, and teak surfaces.
Riverside’s boating community, from the historic Riverside Yacht Club to private dock owners, trusts us because we treat every vessel like it’s our own. Your boat isn’t just transportation; it’s a significant investment that deserves expert care.
We start with a thorough assessment of your boat’s current condition, identifying oxidation, staining, and areas needing special attention. Every vessel is different, so we develop a customized approach rather than using a one-size-fits-all method.
Our cleaning process begins with filtered water to prevent hard water stains, followed by marine-specific pre-soaks that safely loosen salt deposits and grime. We work from the waterline up, treating each surface with appropriate compounds—gentle on gel coat, specialized for teak, protective for metal fittings.
Surface restoration follows, using progressive polishing compounds to eliminate oxidation and restore original shine. We finish with premium marine waxes or ceramic coatings that provide lasting protection against UV rays and salt air. Every detail is inspected before we consider the job complete.
Ready to get started?
Our boat detailing includes complete exterior restoration, from gel coat polishing to metal fitting protection. Interior detailing covers upholstery cleaning, carpet care, and moisture control to prevent mold issues common in Riverside’s humid marine climate.
Specialized services address Long Island’s specific challenges: salt air corrosion, UV damage from intense summer sun, and the algae growth that thrives in our waters. We provide teak restoration using eco-friendly cleaners that won’t damage the wood’s natural oils.
Riverside boat owners also benefit from our ceramic coating applications—advanced protection that lasts significantly longer than traditional wax. This is particularly valuable given our area’s harsh marine conditions and the premium vessels common at local marinas and yacht clubs.
For boats regularly used in Long Island Sound, we recommend a comprehensive detail every 3-6 months, with maintenance washes every 2-4 weeks during boating season. Riverside’s salt air and UV exposure accelerate oxidation and staining.
Boats stored outdoors year-round need more frequent attention than those in covered slips. If you notice chalky surfaces, water spots that won’t wash off, or teak turning gray, it’s time for professional restoration. Regular maintenance prevents costly gel coat repairs later.
The investment in consistent detailing pays off through preserved resale value and reduced long-term maintenance costs. Most Riverside boat owners find quarterly detailing with monthly maintenance keeps their vessels in showroom condition.
Yes, we specialize in gel coat restoration for vessels with severe oxidation, chalking, and fading. Our process involves progressive polishing with marine-specific compounds, starting with aggressive cutting agents and finishing with fine polishes.
Heavily oxidized gel coat requires multiple stages—sometimes wet sanding for the worst cases—followed by careful polishing to restore clarity and depth. We then apply protective coatings to prevent future oxidation. The transformation is often dramatic.
However, gel coat has limits. If oxidation has penetrated too deeply, restoration becomes impossible and repainting may be necessary. We’ll assess your boat’s condition honestly and recommend the most cost-effective approach for your situation.
Our teak service uses a three-step process with non-acid cleaners specifically designed for marine environments. We eliminate mold, dirt, and gray weathering to restore the wood’s natural blonde color without damaging the grain.
Our process includes deep cleaning with eco-friendly compounds, followed by brightening treatments that remove stains and discoloration. We finish with synthetic teak sealers that protect against moisture and UV damage while maintaining the wood’s natural appearance.
For severely weathered teak, we offer wet sanding services using progressive grits to remove damaged surface layers. This is more intensive but can restore even badly neglected teak to like-new condition. Proper teak care significantly extends the wood’s lifespan and maintains your boat’s value.
Yes, we provide mobile detailing services throughout Riverside and surrounding areas, bringing professional equipment directly to your marina, yacht club, or private dock. This eliminates the hassle of moving your boat for maintenance.
Our mobile service includes the same comprehensive detailing available at our facility—we don’t compromise on quality for convenience. We carry specialized marine products, filtered water systems, and professional-grade equipment to ensure optimal results wherever your boat is located.
Mobile service is particularly popular with Riverside Yacht Club members and boats at local marinas who prefer the convenience of on-site service. We coordinate with marina management when necessary and work around your schedule to minimize disruption to your boating activities.
Marine ceramic coatings typically last 12-18 months in Long Island Sound’s challenging environment, significantly longer than traditional wax which may only last 2-3 months. The coating creates a semi-permanent protective layer against salt, UV rays, and oxidation.
Ceramic coating makes ongoing maintenance much easier—dirt and salt deposits rinse off more readily, and the surface maintains its gloss longer. This is particularly beneficial for Riverside boat owners dealing with constant salt air exposure and intense summer UV.
The initial investment in ceramic coating pays off through reduced maintenance frequency and better protection of your gel coat. Most clients find the extended protection and easier cleaning make ceramic coating worth the premium over traditional waxing methods.
Marine detailing requires specialized knowledge of boat-specific materials and the harsh marine environment. Gel coat, fiberglass, and teak surfaces need different products and techniques than automotive paint and interiors.
Salt water exposure, constant UV reflection off water, and marine growth create unique challenges that automotive products can’t address. Using car wax on boats, for example, often provides inadequate protection and may even damage certain marine surfaces.
As professional marine detailers, we understand how to safely clean and protect expensive materials like teak decking, marine upholstery, and specialized hardware. We use marine-grade products designed for saltwater environments and know which techniques work best for different boat construction materials and finishes.
Local Resources
Useful Links
Other Services we provide in Riverside
